Tianhui Machine Co.,Ltd

Σπίτι> Ιστολόγιο> Automatic lathe machining tools and turning tools

Automatic lathe machining tools and turning tools

April 29, 2023

Do not put the automatic lathe processing tools and turning tools on the bed surface to avoid knocking the guide rails. If you need to put it, cover the bed cover on the bed and put the tool and the knife on the bed cover.
a When sanding the workpiece, cover it with a bed cover or paper on the bed under the workpiece; after sanding, carefully clean the surface of the bed.
b When the cast iron workpiece is in the car, install the guard cover on the stern plate, and at the same time wipe off the lubricating oil on the surface of the bed that the chip can splash.
c When not in use, the lathe must be cleaned and maintained to prevent chips, sand or impurities from entering the sliding surface of the lathe rail, causing the rail to “bite” or aggravate its wear.
d Before using the cooling lubricant, the garbage in the lathe rail and the cooling lubricant pan must be removed; after use, the cooling lubricant on the rail should be wiped dry and mechanically lubricated.
Επικοινωνήστε μαζί μας

Author:

Ms. SU LAN RONG

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

δημοφιλή Προϊόντα
You may also like
Related Categories

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ σε αυτόν τον προμηθευτή

Θέμα:
ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:
μήνυμα:

Your message must be betwwen 20-8000 characters

Επικοινωνήστε μαζί μας

Author:

Ms. SU LAN RONG

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

δημοφιλή Προϊόντα

Σπίτι

Product

Phone

Σχετικά με εμάς

Έρευνα

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Αποστολή