January to July Recovery of Kunshan Power Tools Exports

July 11, 2022

According to Kunshan Inspection and Quarantine Bureau, from January to July 2013, Kunshan exported 4439 electric power tools, a slight increase of 3.3% year-on-year, while export value reached 570 million US dollars, an increase of 10.4% year-on-year. After experiencing cold winters in 2012, this year The situation improved, and exports steadily recovered.

Kunshan export power tools products include electric drills, electric planers, electric saws, hammers, sanders, cutting machines, etc., exported to more than 50 countries and regions such as Finland, the United States, Australia, Japan. The EU is the main export market for electric tools in Kunshan, accounting for more than 60% of exports.

Since the beginning of this year, although the European debt crisis has continued to ferment and the world economy has recovered from fatigue, export companies that are under pressure to appreciate the renminbi have responded positively and worked hard. On the one hand, through the development of new products, the product grades will rise to the high-end professional level, and the added value of products will be increased. On the other hand, the emerging markets will be actively developed and the eggs will not be placed in a basket. With a two-pronged approach, Kunshan's export of power tools steadily rebounded.

Kunshan Lighting Exports Surpass $100 Million in Challenge of New EU Energy Efficiency Standards

According to statistics from the Kunshan Inspection and Quarantine Bureau, in July of this year Kunshan's lamps and lanterns exports were US$17.47 million, an increase of 36.81% year-on-year. This year, the cumulative export value was US$103.02 million, an increase of 21.09% year-on-year. It is understood that Kunshan lighting companies will continue to increase the proportion of LED lighting exports. The profit is about 30% higher than traditional lamps, so under the current unfavorable environment of foreign trade, the contrarian growth is still achieved.

LED is the abbreviation of Light Emitting Diode. It uses solid semiconductor chips as luminescent materials to obtain various colors of light such as red, yellow, blue and white by photon emission. At present, LED has been widely used in decorative lights, urban landscape lighting, large-screen display, automotive lighting, general lighting and other fields. The LED consumes only one-tenth of the energy of an incandescent lamp, but its lifetime is 100 times. It is praised as a revolutionary technology in the 21st century era of new solid-state light sources. In view of the increasing maturity of LED lighting technology, in recent years, developed countries such as the United States, Japan, and the European Union have successively formulated relevant standards to regulate the requirements for the safety, performance and energy efficiency of LED products.

It is worth noting that the upcoming September 1st, the latest energy efficiency requirements of the EU LED lighting products will begin implementation. The EU is the region with the highest import requirements for LED products. LED products entering the EU market must meet the safety requirements in the Low Voltage Directive, the electromagnetic compatibility requirements in the EMC Directive, the environmental requirements in the RoHS and WEEE Directives, and the energy efficiency requirements in the ErP Directive. In addition, LED products also need to comply with the conformity assessment procedures stipulated in the corresponding regulations. Only in this way can the CE mark be affixed to enter the EU market smoothly.

According to the ErP Directive, the European Union has developed energy efficiency requirements for different lamps in phases. In 2009, it launched EC244/2009 for non-directional light sources (mainly halogen lamps, fluorescent energy-saving lamps), for fluorescent lamps, ballasts, and accordingly After the EC245/2009 of the lamps, another EU1194/2012 for all LED bulbs and directional light sources was launched in December 2012. This directive will take effect on September 1, 2013 and will be implemented in three phases. Next, the second phase of the implementation of this requirement is September 1, 2014, and the third phase is September 1, 2016.

Προηγούμενος

Επόμενος

Επικοινωνήστε μαζί μας

Author:

Ms. SU LAN RONG

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

δημοφιλή Προϊόντα

Εταιρικά Νέα

OEM Hot Forging και CNC Machining Metal Custom

November 18, 2024

Μέρη ακρίβειας σωλήνων

November 11, 2024