Machining simulation of CNC punching system

April 15, 2023

The CNC punching system provides the function of detecting interference and collision that may be caused by improper parameter setting during the machining process, and can also calculate the time required for processing by comparing the parts obtained after processing with the original design products. This module simulates the machining of sheet metal parts and dynamically displays the stamping cycle, table motion, die change, repeat positioning, and various parameters of the mold in use.

After the machining path is generated, the machining code is automatically generated. The machining program contains the program number, sheet size, number of parts on each sheet, material, thickness and clamp position, as well as the mold used during processing. By examining these parameters, the operator can identify the problem in a timely manner. The program can be saved on your computer.

Powerful communication function, integrated communication module (EDIT/DNC) in the system, realizes data transmission between computer and CNC machine through serial interface, including input and output of CNC program and machine parameters, and realizes DNC processing of machine tool.

Prior to the CAM retrofit, the manual programming time of the part took 2 to 3 hours and the correctness of the machining program could not be verified. After implementing the NC upgrade and transformation, the NC code is automatically generated, and the machining simulation can be performed at the same time. The whole process can be completed in only a few minutes, which not only improves the production efficiency, but also ensures the machining accuracy and the processing quality.

(Finish)

Προηγούμενος

Επόμενος

Επικοινωνήστε μαζί μας

Author:

Ms. SU LAN RONG

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

δημοφιλή Προϊόντα

Εταιρικά Νέα