What should be paid attention to when machining CNC machine tools?

February 27, 2023

[China Glass Network] Nowadays, many glass processing enterprises have applied CNC machining. First, they are drawn by CAD according to the glass size to be processed. Since the position of the glass must be the same when drawing and the drawing, the bottom left corner of the glass must be set as the origin. After drawing the picture, the software will be converted into a processable program by special software.

Compared with metal processing, glass processing is much simpler and has no complicated machining. With the popularization of glass mechanization processing, China will have a large market to develop. Although China's glass machinery industry is currently in the forefront of the development speed and scale, most of them are concentrated in the middle and low-end areas, with low technical level and added value. At present, the precision and complex glass machinery and accessories that China's manufacturing industry urgently needs, the future is the core competitiveness of the products.

What should I pay attention to when machining CNC machines?

Before the CNC glass processing, the equipment must be corrected and returned to zero to check whether the air pressure meets the equipment requirements. Note on CNC glass processing:

1. The tool code must be reset when using a new tool.

2. If there is any error in the size of the finished product, it may be caused by the wear of the tool, and its parameters must be corrected.

3. When selecting a tool, pay attention to the way and direction of the knife to avoid smashing the glass.

4. Pay attention not to be too close to the working area during processing, so as to avoid the device crash when the light-sensitive protection zone is touched.

At present, CNC machining centers are mainly used in furniture glass and automotive glass, and relatively few used in architectural glass. However, with the improvement of the appearance quality requirements of architectural glass, the use of CNC machining centers is also increasing, mainly used in the processing of exposed chamfering grooves, processing of shaped sides, and the like.

Προηγούμενος

Επόμενος

Επικοινωνήστε μαζί μας

Author:

Ms. SU LAN RONG

ΗΛΕΚΤΡΟΝΙΚΗ ΔΙΕΥΘΥΝΣΗ:

susu@cn-tianhui.com

Phone/WhatsApp:

++86 13396680822

δημοφιλή Προϊόντα

Εταιρικά Νέα